Responding to the needs of the times,
We do cleaning work in every field.
We provide cleaning technologies to all plants, we are constantly fulfilling the leadership role of industry by using cleaning technology such as high-pressure cleaning, chemical cleaning, poly pigs cleaning and so on.
We're also a member of the JAPAN WASH INC. Association(JWA), and we're actively working on training and guidance of employees.
We collect, transport and clean up industrial waste in West Japan Works of JFE steel corporation, with long experience and trust.
We are collecting and transporting dust, sewage and stone crushes generated in steel works using large suction vehicles called power probester and dump trucks.
Service of Cleaning construction department
01. Construction management
We are preparing working instructions and construction process for safely and smoothly performing construction.
Various sizes and materials pipes are cleaned using cleaning techniques such as high pressure jet cleaning, poly pigs cleaning, and chemical cleaning.
Samacs washing and blast washing peel off the painted surface.
With power probester (large suction car), waste liquid and debris generated at the construction site, dust and sewage in the factory are sucked and collected and transported to an appropriate disposal site.
we're cleaning various facilities in the factory such as duct, and heat exchanger, and so on by using gun washing and tube washing.
High pressure jet cleaning
Pulverize and sweep out sediments stucked in pipe etc with high pressure water, clean the heat exchanger, clean the duct, etc. Depending on the application, change the way of cleaning like tube cleaning, gun cleaning, pipe cleaning and gun nozzle.
It is one of the method of cleaning called a poly pigs washing. We shoot the pigs into the pipe and get rid of the deposits inside the pipe.
When a pigs is injected from the launcher (launch pipe) into the tube with air, nitrogen or water pressure, scraped deposits are raked out forward together with the fluid.
Remove rust, scales, fats and oils adhering in pipe, using various chemicals that react for them, and make them dissolve, disperse, or emulsify.
The structure with many bends and blind spots can be cleaned certainly, even if it is impossible with other processes.
Various cleaning patterns can be chosen, in addition, powerful and efficient washing is possible with a small amount of water used.
A mixed air jet of compressed air and high pressure water, one particle of water is made into droplets and it hits the object to be cleaned like a machine gun. By this hitting hammer ring effect, we realize a powerful cleaning that has never been before.
In addition, powder media can be injected with mixed air jet and spray, so it is possible to perform dirt and peeling of painted surfaces that can't clean under normal cleaning methods.
Furthermore, compared to the conventional high-pressure water washing machine, the amount of water used has been reduced by 30 to 50%, so wastewater treatment can be easily performed.
Cleaning pattern (5 type)
- Compressed air (blow)
- Compressed air + high pressure water (washing & rinsing)
- Compressed air + powder medium (peeling)
- Compressed air + high pressure water + detergent solution (washing)
- Compressed air + high pressure water + powder or liquid medium (peeling & cleaning)